Check Out
This Weeks Specials
click here.
Home
This Weeks Specials
Go Carts
Pressure
Washers
Oxlite Aluminum Loading Ramps
Parts Dept.
Map To
Store
Contact us
K&T Saw Shop
1199 N Hwy 1247
Somerset Ky 42503
Phone
606-678-9623
or  Fax
606-561-0209
Links old
Equipment List
 GreenMachine Trimmer
Brand Names
Flyer Page
 gm index
 trail blazer
 atv page
carter
atv mini
 Test  Site
 my

 
Which Model is right for me?18 HP DR CHIPPERS12 HP DR CHIPPERS10 HP DR CHIPPER

Because there are a number of DRŽ CHIPPERS to choose from, you may be wondering which model is best for you. So, we've taken some time to answer this question in detail. The information below will also help you compare the different models.

All DRŽ CHIPPERS have the following in common:

  • Easy-rolling pneumatic tires
  • A heavy-duty steel frame
  • Centrifugal clutch with belt drive system
  • Solid steel 1-3/16" flywheel spindle mounted on heavy-duty ball bearings
  • 11" wide hopper opening

Plus, the 18 HP Models feature:

  • An extra powerful, premium quality, twin-cylinder engine with cast-iron cylinder sleeves for extra long life
  • A chipping speed that is 50% faster than our 12 HP Model
  • Twin drive belts for extra smooth operation
  • Road towing capability with 2" ball coupler, safety chains, and light kit installed (Road-Towable model only)
  • A built in tongue stand to hold it level and steady during operation (Road-Towable model only)
  • Electric-Starting is standard

All DRŽ CHIPPERS are covered by our 30-Day Risk-Free Trial, and are guaranteed to be free from defects in materials and workmanship for 3 full years in consumer use (90 days commercial).

 
MODEL
10 HP
12 HP
18 HP
Non Road-Towable
18 HP
Road-Towable
Length
65"
65"
40.5"
86"
Wheelbase
27"
27"
29"
50"
Height
39"
39"
41"
50"
Weight
183 lbs.
226 - 243 lbs.
253 lbs.
358 lbs.
Chipping Capacity
3-1/2"
4-1/2"
4-1/2"
4-1/2"
Chipper Hopper Opening
8" x 11"
8" x 11"
8" x 11"
8" x 11"
Chipper Flywheel
12" diameter, 1/2" thick
14" diameter, 3/4" thick
14" diameter, 3/4" thick
14" diameter, 3/4" thick
Flywheel Weight
18 lbs.
33 lbs.
33 lbs.
33 lbs.
Wheel Size
10-1/2 " x 4"
12" x 4"
16-1/2" x 6"
16-1/2" x 6"
Frame Construction
1/4" plate steel
1/4" plate steel
1/4" plate steel
2" tubular steel
Chipper Knives
1
1
2
2
Engine 10 HP BRIGGS & STRATTON 4-cycle engine: 19.4 cubic inch displacement, MagnetronŽ electronic ignition, mechanical governor, compression release for easier pull-starting, pleated paper air filter, aluminized Low-Tone muffler, 48-ounce oil capacity, 4-quart fuel capacity. ENGINE WARRANTY: 2 years in consumer use, 90 days in commercial use. 12 HP TECUMSEH Overhead Valve, 4-cycle engine: 21.8 cubic inch displacement, cast-iron cylinder liner, electronic ignition, compression release for easy starting, mechanical governor, pleated paper air filter, 28-ounce oil capacity, 4-quart fuel capacity. ENGINE WARRANTY: 1 year in consumer use, 1 year in commercial use. 18 HP BRIGGS & STRATTON Industrial/Commercial, opposed-twin cylinder, 4-cycle engine: 42.3 cubic inch displacement, cast-iron cylinder liner, MagnetronŽ electronic ignition, mechanical governor, pleated paper air filter, Low-Tone muffler, in-line fuel filter, 12-volt battery, fuel shut-off valve, 48-ounce oil capacity, 4-quart fuel capacity. ENGINE WARRANTY: 2 years in consumer use, 1 year in commercial use. 18 HP BRIGGS & STRATTON Industrial/Commercial, opposed-twin cylinder, 4-cycle engine: 42.3 cubic inch displacement, cast-iron cylinder liner, MagnetronŽ electronic ignition, mechanical governor, pleated paper air filter, Low-Tone muffler, in-line fuel filter, 12-volt battery, fuel shut-off valve, 48-ounce oil capacity, 4-quart fuel capacity. ENGINE WARRANTY: 2 years in consumer use, 1 year in commercial use.